Impromptu Redo II

No, it did not take us an entire year to finish the bathroom remodeling project. Yes, it did take me an entire year to blog about it. Could I be a better blogger? Sure, go ahead judge me, but who cares our bathroom looks AWESOME! After the demolition was complete, it took us almost two weeks to get our bathroom put back together.

Bathroom After 1

We installed new paneling and new molding. We used the same window and base molding which matches the remainder of the molding we upgraded here. Caulked all of the seams using paintable molding caulk. There was so much of this to do that it took me almost one entire day. Then we painted on a fresh coat of gloss white paint. We opted for gloss paint in this room to make the surface of the paneling easier to wipe down.

Bathroom After 4

I researched different flooring options for a bathroom application, and based on our choice to leave in the existing flooring(not necessarily the best way but this worked for our budget), we opted for cork patterned floating vinyl plank flooring. I loved the look of the cork but needed the durability and installation perks of vinyl. The color turned out great it was warm, and it doesn’t show every single speck of dirt and hair. We had some tough corners to get the flooring around where two door frames met and inside of the linen closet. I created paper templates which helped reduce the number of mistakes on actual material. We found it easiest to cut the flooring with a pair of snips. We used a carpet installation razor blade in some instances, but the planks of floor were two layers thick which made it difficult. The floor installation took us a day and overall the installation was fairly easy especially once we got to the straight pieces. The thing to note when installing this floor is to make sure that all of the planks and adhering strips align correctly. Once these babies are stuck together, they are tough to get apart and the adhesive comes off making the piece nearly useless.

We also removed the doors and sanded them in preparation for a new coat of paint. While they were removed, we cut them down using a table saw to fit over the new layer of flooring.

As part of our remodel, we selected a new pedestal sink, a new medicine cabinet, and light fixture for above the sink. Everything looked so new and we were really excited once these items were installed. Max ran into the issues with the sink installation and we had to install some wood behind the wall to brace the sink.

Bathroom After 2

Bathroom After 3

For the paint color, we followed along with the inspiration picture with white paneling on white walls. We picked almost an ivory shade to keep the bright fresh warm feel. We used our favorite paint, Valspar Paint/Primer mix. Since the walls were in such bad condition, we applied two coats of paint. Once the paint was on the walls it really started to bring the room together.

Finally, we got to accessories. It took us a while to finally hang pictures on the wall and hang the shelves.

Bathroom After 5

These items put the finishing touch on the remodeling project. There are still a few more improvements we would like to complete in the room, but as I seem to be reminded in all aspects of my life lately, my work is never done!

Back to Blogging

Now that school is finally O-V-E-R – we’re back!  In an effort to fully recoup after three years of being stretched thin, we’re starting out slow. Our first project involved sprucing up some great furniture that was given to us by a close friend (THANKS- WE LOVE IT!). The furniture is a great color and in awesome condition, so to add our own style to it we decided to update the hardware. The original hardware is shown below.

Old Hardware

The first step was just removing the hardware, which was the easy part! Then we visited both of the local hardware stores to find suitable replacements! After drilling a few new holes (yes Meghan, that’s what she said) into the drawers and cabinet doors we installed the new hardware. All of the updated drawers took up nearly in the entire spare bedroom.

After replacing the hardware, next on the agenda was moving the old furniture out and the new furniture in. Major progress has been made in the master bedroom since we bought our house just over a year ago.

Original Before:

Looking at these pictures makes me really proud of our progress so far! When we first moved in, I couldn’t wait to get started making changes.The work we did in December made pretty big strides from our original state.

In Between:

Now, the new bedroom furniture gives our room a whole new feel, and we couldn’t be happier.


Master Bedroom with New Furniture

Master Bedroom with New Furniture

We’ve made some progress, but as usual there is always still more work that needs to be done:

  • Figure something out about the TV situation (anyone notice the books under the TV?)
  • Bed improvements
  • Curtains and wall hangings
  • Lamp situation
  • Painting molding
Total time to improve – approximately 6  hours (including moving all of the furniture to our house, shopping for hardware, and cleaning out old furniture/restocking new furniture – Thanks for the help Dad!)

Total cost for new bedroom furniture  – $84  Not to shabby!

Recent Reno – Post 5 of 6

WOOO! FIVE! We’re almost to the end! This day was a mismatch of solving problems, returning unused items to home stores, working on the finishing touches, and wrapping up cutting the molding. Again, my parents came out to support the efforts!

My Dad and Max kept plugging away on the molding. My mom and I painted some of the old molding in the family room (not replaced), ran errands, and painted the previously yellow spare room’s closet. It was a pretty full day and I was happy to reach the end of a few tasks. Nothing too major to show from my mom and my efforts. The window sill in the family room and the closet door appeared a bit yellowed which we repaired with a fresh coat of white gloss.

The major issue we were working on this day was that the HVAC register we removed needed to be replaced, but the slot for the register was very skinny as shown below.

The issue is that when we install the register grate over the hole, the molding has to sit on top of it. This is not a big deal and would probably never be noticed by the average home visitor (see below).

The problem is that once we nail down the molding there is no getting that register out of there, and when we go to replace the floor we need to be able to remove the register. In many cases, we’re going to do our best to follow recommended/best practice procedures, but sometimes snafoo’s like this one pop up. Then you’re faced with the dilemma or doing everything the “right way” just the way the works for us within our budget. We decided to temporarily install this molding by drilling pilot holes and partially hammering in some finish nails (not the threshold kind). This way  they could be pried out to remove piece of molding and the register when we go to install new flooring. Here was our solution:

We left  the nail sticking out about 1/4 inch, and only used a few nails to hold the molding to the wall until new flooring is installed at a later date.

As for the remainder of the changes on this day no progress was apparent in pictures, but it was important to call this day out for a very important safety lesson learned. When using  power tools,  exercise proper safety precautions and remember they are dangerous. This day came to a close with a visit to the ER, and Max getting a tetanus shot (he shot his thumb with the nailer – oops! We’re just glad it wasn’t the saw!). We were in and out pretty quick and Max was good to go in the morning. The next day’s plans were exciting- clean up and get the house back to normal!

Recent Reno – Post 4 of 6

From my previous experience, the first several days were smooth sailing as far as old house renovations go. Day four was the beginning of experiencing set backs. We started out first thing in the morning by tearing up the carpet in the upstairs. At this point we discovered two fun things. First, we found our closet floor was covered by contact paper (OMG- who does that?). Second, we found out that the carpet installers GLUED down the carpet padding to the hardwood (seriously what were these people thinking?). We didn’t have time to care at that point, so we just kept moving by taking all the old carpet to the Gucci Dump

Next, we stopped by Home Depot to pick up all of the molding. We had already pre-shopped, and we knew we were purchasing contractor packs of 5 and 1/4 inch base molding for just about $1.10  a linear foot. We hadn’t concretely decided on a casing molding for all of the doorways and windows, but we landed 3 and 1/4 in width of  a fairly traditional style which was again about a $1.12 a linear foot.

This quickly added up to most of our budget, so we were careful to only re-do the molding on walls we knew we were keeping (there are some major wall moves and removals in the planning phases). We made the decision to remove and replace all of the base and casing molding for several reasons: the molding had been painted poorly many, many times; the molding was not coordinating throughout the house; the molding was not capable of hiding many of the imperfections in the drywall around the floor left from removing old school HVAC registers and paneling. The list could go on, but I won’t bore you. The first snafoo with the molding we ran into was getting the 16 ft long pieces/packs of molding to our house. We own a pick up truck, but Max was rightfully nervous about the extreme weather conditions (very windy) and crazy drivers in our area with us scooting along with 6-8 ft of molding sticking out behind our truck. We rented a 12 ft bed Home Depot truck for an hour to get the molding home, and we made it home with no damage to our load.

When we arrived at the house, my parents were already there hard at work removing the carpeting tack strips and staples. (SWEET!) I took on the task of returning the Home Depot truck and picking up our truck, leaving Max and my parents back at the house to work.  When I got home, all of the tack strips and staples were removed except for in the master bedroom. The master bedroom was double tack stripped, which at first didn’t seem too bad, but it definitely took double the time. Also, the installers used finishing nails ( the kind made for thresholds) made it that much more difficult to remove the tack strips. After finishing up with the removals, I tackled the contact paper in the closet, which luckily came up with no problems. This was not so much the case for the glue and double sided tape.

My mom and I spent more than a few hours with a bucket of warm water and soap just wetting and slowly scraping the glue and tape off the floor. It came up but there was still some damage to the floor. All in all, I’m happy because we did the best we could and we eventually plan on doing something to the floor down the line. Plus any angle I think about it from, the hardwood is still way better than carpet.

I’m sure you’re wondering where were my Dad and Max all afternoon while my mom and I were on glue duty? My Dad was showing Max how to measure and cut the base and casing molding. All I know is they were in and out a whole lot, every once in a while I’d hear, “it’s 38 1/4 and a line – what do you think?”, and someone would reply, “oh yea 38 1/4 and a line” then they would scamper around back to the saw set up. They got pretty  far before we decided to call it a night, but there was still plenty to be finished up the next day. Here are a few shots of the hallway and bedrooms with the base molding placed, but not installed. Also, some/most of the case molding is adhered to the walls, and the carpet has been removed.

Here’s the master bedroom:

Here is the spare room that I call Elsie’s room. There has been no molding around these doors and windows for months. Also, this is  the room I plan to paint stripes in at some time. As you can tell from this blog post, in order to make progress for the molding we had to remove a lot of the items we were storing in here.

This is the upstairs hallway, and it is apparent that the doorway at the end of the hallway was left incomplete at the end of this day.

And lastly, here is the stairway and nook.

Recent Reno – Post 3 of 6

On the third day, “monkey paw” as well as many other aches and pains started setting in. I’m sure the first thing that’s coming to your mind is… what is “monkey paw”? Well, monkey paw is the term we use for the hand cramping that occurs for those of us who are more or less desk jockey’s at work and then spend 24 of the previous 48 hours doing home improvements. I’m no doctor but logic would suggest it comes from using muscles that are not regularly used to grip items such as hammers, crow bars, sanders, and paint brushes  to an extreme. Unfortunately until you work to the point of numbness, it can be quite painful (oh yes, this is how we roll). This was our physical condition when we started off day three.  Not to mention this was the day that the mess started really getting to me. There was debris all over the floor despite constant cleaning and everything was everywhere and there was nowhere to put anything (I’m an everything in its place kind of gal so, this really bugs me). Here you can see in this picture of Elsie all of the little wall pieces and random things placed all over the floor. Please keep in mind this was only a snap shot of a 5 ft by 5 ft area, and the whole house was in this condition.

When considering all the aches, pains, anxiety, and an analysis of progress made in comparison to time remaining to work/recoup, we decided it was best to nix the bathroom remodel. The good news is that we did some major shopping and learned a lot about what’s available and in style for bathrooms these days, so we did make some progress just not anything physical. Oh well, we’ll just wait until after the spring semester (guess I’m stuck with Christmas trees a little longer than I planned).

Day three began with a trip to the “Gucci Dump”, which is an awesome landfill because you drive up to a cement barrier and throw things over the side. There are no seagulls, no stepping in garbage, and there is minimal mud.  This was followed by stops at Home Depot and Lowes to get all of the paint (did I mention that we live 10 minutes away from everything? – Awesome!). We bought 5 gallons of Valspar Signature Paint Foggy Mirror, 2 Gallons of Behr Premium Plus Basketry, and lastly one gallon of Olympic Premium Paint Sand-dollar. Also,  re-enforcements (my Mom and Dad) arrived to help for the day shortly after we got home from shopping – WOOO!

We decided not to remove the carpet until after painting, and it served wonderfully as a drop cloth. The rooms really started to transform on this day.  Applying the color to the walls made a huge difference. My Dad and I took on trimming the foggy mirror gray.

My mom was assigned to the basketry tan color for the two bedrooms.

And last but not least, Max spent the first 8 hours of the day replacing electrical sockets and light switches because they were either a) painted over and unusable or b) a hodge podge of various colors. He also installed a ceiling fan in the previously yellow spare bedroom.

During this day of painting, I managed to paint every color and all three brands (Olympic, Valspar, and Behr) of premium paints on the wall. The first lesson I learned is that when your walls are in as crappy a condition as ours were, it is WAY worth it to spring the extra dough for the premium paint as it shows better coverage than non-premium (which was the ceiling paint from the previous day). Also in my unprofessional opinion, the Valspar Signature color had better coverage .  The Behr and Olympic were comparable, but not as good as the Valspar (sorry Behr and Olympic!). Next, we all discovered the accuracy of trim lines when using Frogs Painting tape over the standard blue paint tape or hand painting.  In most cases, I went back and touched up after removal of the Frog’s tape, but it helped expedite the process tremendously. Lastly, my Dad taught me a little trick to keep my trimming brush fresh. I learned that if I rinse out the brush periodically and dry it off with a towel after rinsing that it made little to no effect on the paint and it was easier to clean the paint brush when I finished.

Here was the progress at the end of day three:

Spare Bedroom – Behr Basketry (don’t mind the bed and check out the new ceiling fan!)

LR/DR – Valspar Foggy Mirror

Tricky Part of the Hallway shown only with the trim painted here (this was where I displayed my amazing balancing act!) – Valspar Foggy Mirror

Family Room – Valspar Foggy Mirror

Family Room (painted paneling) – Olympic Sand dollar

Oh, and did I mention I spent a lot of time in the sink last week? Yikes, here I am again!

We painted ALL day, and we finished all of the color painting – BOOM! I’m still learning to remember to get pictures of every room, so only the rooms I remembered to photograph were shown here (Oops!). It was awesome and celebrated by some serious sleep to prepare for the day’s next carpet removal and molding efforts.

Recent Reno – Post 2 of 6

As soon as we got home on Christmas night, we started packing away Christmas – kind of sad I know. We were keeping in mind the bigger picture and it meant we had to pack and stack away as much stuff away as possible to maximize construction space and items to be cleaned post reno. Preparing the house took easily a half a day of our timeline and here is what the house looks like in construction mode. First, there was stuff piled up wherever we weren’t doing any painting. Such as here:

and here:

Then we piled all of the items that were too large to move in the center of the rooms and covered them with drop cloths.

After finishing up more prep work, I ran around touching up on all of the spackling either by sanding or adding extra layers as necessary while Max started tearing down the paneling. Here is Max now working it!

Once we removed all of the paneling and molding in the master bedroom, it was not looking too pretty.

Next, came the spackling of the master bedroom. Then we began trimming and rolling paint onto the ceiling all throughout the upstairs, living room, dining room, and family room. By the end of the night, the ceiling had a fresh coat of paint. Since we decided to just repaint the ceiling white again, there wasn’t much to photograph but here’s the condition of the master bedroom at the end of day 2.

We also painted samples on the wall to select bedroom color for the master bedroom and the unpainted spare bedroom (the one with yellow walls) as shown by my lovely assistant Max.

I know that none of them are too different then the color that was revealed after the paneling was removed, but that was just chance as we had no idea what color was underneath of the paneling. We took a night to mull over the new color which wrapped up day two of the renovations.

Recent Reno – Post 1 of 6

After spending plenty of time contemplating (while painting, scrubbing, cleaning, sanding, etc) the best way to blog about all of our recent improvement, I’ve decided the best way to cover the whole process is just to go chronically. Six days of renovations makes for six blog posts. We started out with demo on Christmas Eve morning. The first day had a few items on the agenda.

First, we began by taking the paneling down in the spare room that was untouched. Here is the before picture of the room:

Once we starting taking off the paneling we found yellow walls underneath, fun!

Then we spent the rest of the morning spackeling  to prepare for painting as shown in a few pictures below (in the spare room and other rooms). I even got to sand one layer of spackle.

Honestly, everything was pretty tolerable this day.  We only worked for a few hours and we spent as much time working as we did cleaning up after ourselves ( shown below). I spent a lot of time in this laundry sink the last few days.

We tried to plan appropriately, so we could have plenty of time to rest for the Christmas Eve activities. Understandably, the progress wasn’t super exciting as we were still in the tear things down phase of the project.

Setting the Table

After a few weeks of having the dining room table and buffet situated in place, I was feeling the urge to take it to the next level. During meals, Max and I found ourselves worried about damaging the surface of the table top or turning the buffet into the place where we dropped our keys and stuff when we came in the door. The buffet issue has taken a lot of discipline to walk the extra three whole steps to drop our keys on the Ikea shelf in the kitchen. (we were stink eyeing each other each time we came in the door to see who would mess it up first)  We’re pretty adjusted at this point, but to solve the table dilemma something had to be done.

For a week or so I’ve been just thinking about replacing the place-mats and maybe getting one or two extra to put in the middle of the table. Then during some consignment shopping I came across a set of gold/silver leafed chargers. Prior to that shopping experience, if you had said charger, my mind would’ve drifted to cell phones, cars, or batteries. Now, I have a new definition to at to the list, it’s a platter  and it seems fancy. I got a set of 10 of them and each one was less than a $1.00! As I was putting some felt feet on the bottom of one of them (to protect the table), I noticed a Crate and Barrel sticker. I was looking them up on Crate and Barrel and they run $15.00 or more a piece. Snap! It turns out I got quite a deal!  Here is one of the chargers with felt feet.


Also, I’ve been looking on, and I’ve noticed a lot of people put plants on their dining room tables. I liked it. Between the chargers, the plants (thanks to my re-potting project), and a new set of place-mats I think it turned out pretty nice! It really makes the room feel much more homey.

Set Table

Jumping Off in Spare Bedroom 2

I apologize for being so long with out a new blog post. Lame I know. I could list the 100 reasons for not blogging in the last 2 weeks, but who cares. I’m back having learned a valuable lesson about motivation and momentum in blogging – when you stop for more than 3 days you lose your dedication!  I’m sure the ‘progress’ pictures of the dining room are much anticipated. However, it’s too dark to take them right now, and I wasn’t going to let that stop me from blogging today. I’m planning on painting primer in spare bedroom 2 this weekend (shh Max doesn’t know yet), so I thought that might be a topic to get back into the groove.

I’m sure everyone is already familiar with the before pictures of Spare Room 2, which is also lovingly referred to as Elsie’s room. In case you missed them in this blog post, here they are again. This view is all the way in the room looking out.

Here is the room facing the opposite direction.  I removed all of the wall paper covered paneling and beige carpet since these pictures were taken. Unfortunately,  I was not blogging at the time of the removal and deconstruction, and I missed the fun demo pictures – my bad. There is Sheetrock underneath of the paneling, and it is this fun green color you can see below.

The modeling was removed with the paneling because it was the cheap stuff and it was in bad shape. As you can tell from these progress pictures, I have already used Spackle to repair the holes created from affixing the paneling to the wall. Again, an awesome photo opportunity was missed, but I do have a great lesson in applying Spackle to share. Many applications of thin layers allow you to wet sand making much less mess than putting it on thick and thinking –  ‘oh, I’ll just sand it off later’. The later was what I choose to do even though someone shared this lesson with me before hand (thanks Dad!). Apparently for me to completely grasp this great parental advice, I needed to do it the hard way. I spent 4 hours sanding and what was a huge mess. Max came home from work one Friday, and there I was in the room sanding away with a 1/8 inch thick layer of mint green dust everywhere.  It took cleaning the floor 4 times before it was the right color again. To give you an idea of how stylish I was looking when I was finished check out these two sandy dudes (who I don’t know – thanks Google Image Search!).  At least I was smart enough to wear a respirator and safety glasses!

I can’t wait to see how the room looks after applying a layer of primer. WOO!